STARTER KIT 2 x CLEAR COAT à 150g

POLYESTER POWDER COATING

Quality coating powder

Starter kit 2 x CLEAR POWDER COAT

Total weight 300 grams

150 g. CLEAR COAT transparent high gloss

150 g. CLEAR COAT transparent matt

Application

In the multi-layer process, handle the powder coatings as follows:

After the component has been stripped and degreased, e.g. by glass bead or sand blasting, the first coat of paint (primer) is applied and baked in a preheated oven according to the recommended burn-in conditions. Remember that the baking time will vary depending on the thickness of your substrate.
After the curing time, allow the component to cool down briefly. When the object has a residual temperature of approx. 70°/80° C, the second layer (e.g. RAL 9005) is applied and baked again with the recommended burn-in conditions. Do the same with the third layer (clear coat). When baking, please ensure that the object temperature is correct in each case with the corresponding holding time (ideally using a laser temperature measuring device)

The individual steps must be carried out in one operation in order to ensure cross-linking of the respective layers.

The final strength of the powder coating is reached approx. 5 - 30 minutes after cooling.

Suitability

all common tribo and corona powder guns and powder coating systems

Application all metals for indoor and outdoor use

Unit of measure:

300 grams = amount 1